Guido Günther [Tue, 11 Jan 2022 19:21:55 +0000 (20:21 +0100)]
wayland: xdg-activation: Don't assume there's a focus surface
Tools like gtk4-launch can't set surface on the activation token so
don't require it. If the compositor requires it we can't do anything
about it anyway. This avoids a critical:
Carlos Garnacho [Mon, 28 Feb 2022 17:31:40 +0000 (18:31 +0100)]
wayland: Use xdg-activation for non-startup initiated focus requests
Currently, we have all the plumbing in place so that GTK consumes the
startup notification ID when focusing a window through the xdg-activation
protocol.
This however misses the case that a window might be requested to be
focused with no startup ID (i.e. via interaction with the application,
not through GApplication or other application launching logic).
In this case, we let the application create a token that will be
consumed by itself. The serial used is that from the last
interaction, so the compositor will still be able to do focus prevention
logic if it applies.
Since we already do have a last serial at hand, prefer xdg-activation
all the way over the now stale gtk-shell focusing support. The timestamp
argument becomes unused, but that is a weak argument to prefer the
private protocol over the standard one. The gtk-shell protocol support
is so far left for interaction with older Mutter.
Matthias Clasen [Mon, 14 Mar 2022 19:40:12 +0000 (15:40 -0400)]
gtk-builder-tool: Operate without display
The simplify and validate commands can function
without a display connection, only preview absolutely
needs one. Allow this, by using gtk_init_check().
This one can be used for both premultiplied and non-premultiplied alpha
formats, since alpha is always 255. It is useful for opaque PNG upload
on both cairo and GL renderers.
gdk: Make the optimized premultiply function a macro
That way, all permutations are possible. Previously it was only useful
in the cairo renderer, which required rgba8 → premultiplied bgra8, while
the GL renderer required rgba8 → premultiplied rgba8. Now both are
available.
gdk: Remove pixel format conversion ARM intrinsics
This was only useful when building for AArch32 without -mfpu=neon, on
AArch64 or with -mfpu=neon gcc is smart enough to do the auto-
vectorisation, leading to code almost as good as what I wrote in 1fdf5b7cf8fec2d94389ecad5ec28865f8dcfd99.
It appears that NVIDIA does not implement EGL_EXT_swap_buffers_with_damage
on their EGL implementation, but does implement the KHR variant of it.
This checks for a suitable implementation and stores a pointer to the
compatible implementation within the GdkGLContextPrivate struct.
Matthias Clasen [Mon, 7 Mar 2022 18:33:45 +0000 (11:33 -0700)]
text: Stop blinking when we lose focus
We were looking at GtkWidget:has-focus from
event controller signal handlers here, but
the widget property is only changed after
the event controllers.
Christoph Reiter [Sat, 26 Feb 2022 15:32:15 +0000 (16:32 +0100)]
CI: disable debug for MSVC
CI currently fails with "fatal error LNK1318: Unexpected PDB error; OK (0) ''"
Google tells me it might be related to hitting a memory limit. Let's try
disabling debug for now.
Luca Bacci [Tue, 22 Feb 2022 08:15:28 +0000 (09:15 +0100)]
GdkWin32: Configure as needed when going fullscreen
Apply the fixes made by Chun-Wei Fan in [1] also for fullscreening /
unfullscreen. Fixes https://gitlab.gnome.org/GNOME/gtk/-/issues/4631
Also set the SWP_FRAMECHANGED flag as written by Raymond Chen in "How
do I switch a window between normal and fullscreen?" [2]
> An important flag to pass here is SWP_FRAMECHANGED, which tells
> the window manager to recalculate the window decorations (which we
> need it to do because we just changed them).
Philip Zander [Sun, 27 Feb 2022 15:32:59 +0000 (16:32 +0100)]
gdkkeys-win32: Only perform substitution as last-resort
Instead of performing keyboard layout substitution whenever we find a matching
entry in the registry, first try to load the original layout and only attempt
substitution when that fails.
This broke with the previous fixes for initial window positioning. We need
the initial positioning so that tails will be displayed correctly when the
popover surface is displayed.
If the size changes, we need to relayout the tiles. Otherwise we can keep
using what we had before. Generally, that shouldn't happen, but the
previous check was failing in a number of ways.
It looks like, particularly on the M1, we might need to double buffer the
contents of the IOSurface<->OpenGL texture bindings. This doesn't appear
to show up on the Intel macbooks I've tried, but I've seen it in the wild
on an M1.
macos: fix window drag across mixed-scale monitors
If we have a 2x scale laptop with a 1x scale external display, we would
need to create a new IOSurface for the external display once it crosses
a boundary, otherwise we won't have something capable of displaying
correctly on the second monitor.
This provides a major shift in how we draw both when accelerated OpenGL
as well as software rendering with Cairo. In short, it uses tiles of Core
Animation's CALayer to display contents from an OpenGL or Cairo rendering
so that the window can provide partial damage updates. Partial damage is
not generally available when using OpenGL as the whole buffer is flipped
even if you only submitted a small change using a scissor rect.
Thankfully, this speeds up Cairo rendering a bit too by using IOSurface to
upload contents to the display server. We use the tiling system we do for
OpenGL which reduces overall complexity and differences between them.
A New Buffer
============
GdkMacosBuffer is a wrapper around an IOSurfaceRef. The term buffer was
used because 1) surface is already used and 2) it loosely maps to a
front/back buffer semantic.
However, it appears that IOSurfaceRef contents are being retained in
some fashion (likely in the compositor result) so we can update the same
IOSurfaceRef without flipping as long as we're fast. This appears to be
what Chromium does as well, but Firefox uses two IOSurfaceRef and flips
between them. We would like to avoid two surfaces because it doubles the
GPU VRAM requirements of the application.
Changes to Windows
==================
Previously, the NSWindow would dynamically change between different
types of NSView based on the renderer being used. This is no longer
necessary as we just have a single NSView type, GdkMacosView, which
inherits from GdkMacosBaseView just to keep the tedius stuff separate
from the machinery of GdkMacosView. We can merge those someday if we
are okay with that.
Changes to Views
================
GdkMacosCairoView, GdkMacosCairoSubView, GdkMacosGLView have all been
removed and replaced with GdkMacosView. This new view has a single
CALayer (GdkMacosLayer) attached to it which itself has sublayers.
The contents of the CALayer is populated with an IOSurfaceRef which
we allocated with the GdkMacosSurface. The surface is replaced when
the NSWindow resizes.
Changes to Layers
=================
We now have a dedicated GdkMacosLayer which contains sublayers of
GdkMacosTile. The tile has a maximum size of 128x128 pixels in device
units.
The GdkMacosTile is partitioned by splitting both the transparent
region (window bounds minus opaque area) and then by splitting the
opaque area.
A tile has either translucent contents (and therefore is not opaque) or
has opaque contents (and therefore is opaque). An opaque tile never
contains transparent contents. As such, the opaque tiles contain a black
background so that Core Animation will consider the tile's bounds as
opaque. This can be verified with "Quartz Debug -> Show opaque regions".
Changes to Cairo
================
GTK 4 cannot currently use cairo-quartz because of how CSS borders are
rendered. It simply causes errors in the cairo_quartz_surface_t backend.
Since we are restricted to using cairo_image_surface_t (which happens to
be faster anyway) we can use the IOSurfaceBaseAddress() to obtain a
mapping of the IOSurfaceRef in user-space. It always uses BGRA 32-bit
with alpha channel even if we will discard the alpha channel as that is
necessary to hit the fast paths in other parts of the platform. Note
that while Cairo says CAIRO_FORMAT_ARGB32, it is really 32-bit BGRA on
little-endian as we expect.
OpenGL will render flipped (Quartz Native Co-ordinates) while Cairo
renders with 0,O in the top-left. We could use cairo_translate() and
cairo_scale() to reverse this, but it looks like some cairo things may
not look quite as right if we do so. To reduce the chances of one-off
bugs this continues to draw as Cairo would normally, but instead uses
an CGAffineTransform in the tiles and some CGRect translation when
swapping buffers to get the same effect.
Changes to OpenGL
=================
To simplify things, removal of all NSOpenGL* related components have
been removed and we strictly use the Core GL (CGL*) API. This probably
should have been done long ago anyay.
Most examples found in the browsers to use IOSurfaceRef with OpenGL are
using Legacy GL and there is still work underway to make this fit in
with the rest of how the GSK GL renderer works.
Since IOSurfaceRef bound to a texture/framebuffer will not have a
default framebuffer ID of 0, we needed to add a default framebuffer id
to the GdkGLContext. GskGLRenderer can use this to setup the command
queue in such a way that our IOSurface destination has been
glBindFramebuffer() as if it were the default drawable.
This stuff is pretty slight-of-hand, so where things are and what needs
flushing when and where has been a bit of an experiment to see what
actually works to get synchronization across subsystems.
Efficient Damages
=================
After we draw with Cairo, we unlock the IOSurfaceRef and the contents
are uploaded to the GPU. To make the contents visible to the app,
we must clear the tiles contents with `layer.contents=nil;` and then
re-apply the IOSurfaceRef. Since the buffer has likely not changed, we
only do this if the tile overlaps the damage region.
This gives the effect of having more tightly controlled damage regions
even though updating the layer would damage be the whole window (as it
is with OpenGL/Metal today with the exception of scissor-rect).
This too can be verified usign "Quartz Debug -> Flash screen udpates".
In GTK 4, we have the ability to perform sizing changes from compute-size
during the layout phase. Since the macOS backend already tracks window
resizes manually, we can avoid doing the setFrame: immediately and instead
do it within the frame clock's layout phase.
Doing so gives us vastly better resize experience as we're more likely to
get the size-change and updated-contents in the same frame on screen. It
makes things feel "connected" in a way they weren't before.
Some additional effort to tweak gravity during the process is also
necessary but we were already doing that in the GTK 4 backend.
Backporting
===========
The design here has made an attempt to make it possible to backport by
keeping GdkMacosBuffer, GdkMacosLayer, and GdkMacosTile fairly
independent. There may be an opportunity to integrate this into GTK 3's
quartz backend with a fair bit of work. Doing so could improve the
situation for applications which are damage-rich such as The GIMP.
There are situations where our "default framebuffer" is not actually
zero, yet we still want to apply a scissor rect.
Generally, 0 is the default framebuffer. But on platforms where we need
to bind a platform-specific feature to a GL_FRAMEBUFFER, we might have a
default that is not 0. For example, on macOS we bind an IOSurfaceRef to
a GL_TEXTURE_RECTANGLE which then is assigned as the backing store for a
framebuffer. This is different than using gsk_gl_renderer_render_texture()
in that we don't want to incur an extra copy to the destination surface
nor do we even have a way to pass a texture_id into render_texture().
macos: fix allocation for filechoosernative filter
The GtkFileCHooserNativeQuartz injects a NSComboBox into the NSSavePanel
(which is displayed in a remote process since 10.15 whether or not you are
a sandboxed application). The style has changed and we need more space
here to not clip part of the combobox out of view.
I tried every size from 22 to 30 and this seemed to look the most natural
without skewing the location of the text within the combobox.
Kévin Commaille [Tue, 22 Feb 2022 09:56:39 +0000 (10:56 +0100)]
emoji: Add more locales
Based on the locales that are at least 85% translated in Damned Lies:
https://l10n.gnome.org/releases/gnome-41/
Limited by the locales available in emojibase
projects / gtk4.git / log